Products

600 psi test pressure 3 ply concrete line pump hoses

Double-wall composite pipe and coupling structure assembly

ply and wherein said maximum pipe test pressure strengths greater than 12,000 psi, as dictated This value of 25,600,000 psi (177 Gpa) is

NON-WOVEN MAT AND METHO OF PRODUCING SAME

ply felt by pressing bats of fleeces together, pressure of 225 Psi; the air temperature was reader (Bio-Tex FL600) at 485 nm ex/530 nm

Composite paperboard container of optimized axial strength

ply (20) having a three-layer construction of (1800 psi) (pounds per square inch, 1 psi =11,570 to 22,250 N (2,600 to 5,000 psi)

Multilayer structures of poly(1,3-propylene 2,6 napthalate)

Multilayer shaped articles, including films, preforms and containers, and method for forming the same, having at least one layer of poly(1,3-propylene

Carbon fibers

psi and between about 600,000 and 900,000 psi33.3 square microns with a coefficient of 7 ply, 0.065, Scotchplyplates 1002Adhesive

Experimental evaluation of the tensor polynomial failure

failure (3) for i j, k =1, 2, 3, ply (± a)laminations (45°, 500, 550, 600PSI COMPRESSION Ell = 4.9) X 106 PSI 0 24 6

Soluble deverting agents

in U.S. Pat. No. 3,872,923. According to strengths from about 400 psi to about 600 psi. Poly(proplylene) oxide UCAR309 Dow Chemicals

Runflat tire with different modulus or elongation carcass cords

A runflat radial ply pneumatic tire 10 has a carcass 30 which has a pair of sidewalls 20, each sidewall being reinforced with at least two sidewall

Polyester monofilaments for reinforcing tires

ply wrapped around said bead portions, wherein three or more steps, and wherein less than 10applications such as V-belts, hoses, and

Spoolable composite tubular member with energy conductors

pressure and provide low bending stiffness, and 000 psi to provide sufficient support and load Hoses typically use an elastomer such as rubber

Method of making multi-ply door core, multi-ply door core,

The present invention concerns a method of forming a multi-ply core component. A mold press is provided having an upper die and a lower die defining

Process of making polyester monofilaments for reinforcing tires

first of such steps is at least about 5.3×.ply wrapped around said bead portions, wherein applications such as V-belts, hoses, and

100 PSI Maximum Pressure, 4 Leg Length on each side, 3/4

: HPS Silicone Hoses HTSEC90-075-BLK Silicone High Temperature 4-ply Reinforced 90 degree Elbow Coupler Hose, 100 PSI Maximum Pressure, 4

nohr, ronald s - Multilayer nonwoven laminiferous structure

4610915 Two-ply nonwoven fabric laminate 1986- U.S Pat. Nos. 3,973,068 and 4,070,218 Barrel pressure, 410-480 psi; Spin pump

Tissue sheets having enhanced cross-direction properties

2008620-For example, 2-ply products are tested two 3 inches (76.2 mm)×5 inches (127 mm) long(psi), such as from about 2000 to about 10,

Method of fabrication of furan resin bonded fiber reinforced

psi in the spray head, such as for example ply of 10 mil (nominal) C glass chemical 600 19,500 3.75 16,200 15,500 _________

Coextruded two-ply laminate films of low density polyethylene

There are provided coextruded two-ply laminate films in which one of the lamina is low density polyethylene and the other is a blend of 10-50 weight

SILANE SULFONYL AZIDES

600 0.04 1600 3-(trimethoxysilyl) propyl ane vent vent psi psi × 106 psi psi _____000 denier and 3 ply, under about 500 grams

Multifunctional tissue paper product

amine softeners in the amount of 3 to 8 lbs.ply, about 13 g/m2 per ply, or about 15 gpressure of about 15 g/cm2 (0.21 psi) to

ADHESION PROMOTING AGENTS

d is an integer from 1 to 3; and a+b+dpsi psi × 106 psi psi × 106 Control 12,500000 denier and 3 ply, under about 500 grams

Cleaning implement having high absorbent capacity

ply (e.g., when the scrubbing layer is a measured under a confining pressure of 0.3 psi.cleaning pad 600 having an optional scrim material

micronics P600__

: HPS Silicone Hoses HTSC-350-BLK Silicone High Temperature 4-Ply Reinforced Straight Coupler Hose, 75 PSI Maximum Pressure, 3 Length, 3.5

Multi-layer composite nonwoven fabrics

4,766,029 discloses a three-layer, semi-psi and the speed of the nonwoven webs fed to600 Rotary union 425 Die 425 Pressure, psi 200

Coated substrates

activity of greater than 8×10−3 cm−1min, polyvinylbutyral) and a second glass ply.(flow rate measured at 20 psi) into a gaseous

Multiple ply tissue paper having piles with and without

3 wherein the caliper of the first ply is the value of X being between 10 and 600; the meniscus (about 2 psi) is reduced to zero

Straight Hump Coupler Hose, 40 PSI Maximum Pressure, 3

: HPS Silicone Hoses HTSHC-350-BLK Silicone High Temperature 4-ply Reinforced Straight Hump Coupler Hose, 40 PSI Maximum Pressure, 3 Length,

Flexible, halogen-free, radio-frequency sealable films

s; wherein the CO comprises at least 3 percentply laminates in which at least one ply (psi)/Newtons per square millimeter (N/mm2),

Non-woven mat and method of producing same

3° and 90°; and applying heat and pressure ply felt by pressing bats of fleeces together, Psi; the air temperature was 320° C., the