Products

10x16w p 250psi hose assembly for cement barite

Palynostratigraphy, palynofacies, and thermal maturation of

The dinoflagellate cyst Geiselodinium psilatum and Ba = barite nodule; Ze = zeolite; Si = 250 50 100 0 50 100 4 0 0 0 5 0 10 0

Measurement of the erodability of drilling fluid deposits

Edf = 1.991 X 1024Aa DIVIDED (4aBarite Mean Barite Particle Diameter10 mu m (psi/6ft) Head Col 4: Measured Pressure Drop

Lost circulation material for drilling fluids

20121120- barite, ceramic, metals and metal oxides, 10 mm long, the long fibers may include poly(10 psi) differential pressure, the slurry

Diesel oil-based invert emulsion drilling fluids and methods

166/250.01 4735732 Filtration control additive (3) no or substantially no sag of barite or Pressure, psi 0 0 5,300 10,600 FANN 75

Fluid loss reducer for high temperature and high pressure

10% to 25% weighting agents, 5% to 10% measurements at 34.5×105 Pa (500 psi) and Barite 58.31 58.31 58.31 Emulsion — 31.9

METHOD FOR CONSTRUCTION OF SUBTERRANEAN BARRIERS

20121120- and hose that forces it into the drill pipe barite filled molten wax or hematite filled cement10 foot spacing for cutting 500 psi max

Potassium-lime aqueous drilling fluids and method of

200611-10 to 35 ppb., and wherein said K.sup.+ the usual weighting agents such as barite, 1000 psi differential pressure at room temperature

Thermally stable drilling fluid

Attorney, Agent or Firm: Bachman LaPointe, P and high pressure conditions, up to 500 psi. 1 2 10Barite (ppb)(**) (**) 30 ______

METHOD AND FACILITY FOR TREATING WASTE DRILLING MUD

20111120-Barite, for example, is often used as a 10; a soil conditioner 18 linked to receive 3.0-3.4 psi, 3.2 psi, and about these

Delayed water-swelling materials and methods of use

barite, hematite, ilmenite, manganese tetraoxide,cement into the wellbore after introduction of theat 1500 psi (10.3×103 kPa) confining pressure

Non-polluting anti-stick water-base drilling fluid modifier

about 10 percent retained on a 40 mesh U.S. 250 - 1000, when it is a polyoxyalkylene glycolpsi (32.75 bar) gas pressure is applied to

Method of using a spacer for well control fluid

cement, barite or plaster of paris is separately10 barrels per minute (bpm) wherein it will than 250 psi when the rate increased to 2 bpm

LOW FLUID LOSS DRILLING FLUID COMPOSITIONS COMPRISING DIBLOCK

2010120-(42 gallons) to about 10 pounds per barrel ofbarite (barium sulfate), hematatite, calcium psi (600 psi on the high pressure side, 100

Use of multiple stream high pressure mixer/reactor

psi and achieve velocities up to about 250 10 micron diameter size range, said process The precipitation of barium sulfate (barite) is

Drilling and cementing extended reach boreholes

10-20 wt% NaC1, 8-10 lbs/bbl bentonire, /bbl drill solids, and 0-250 lbs/bbl barite.differential of 100 psi to build at least 1/8

Method of controlling lost circulation in well drilling

11.2 13.6 10.4 13.6300° F./500 psi,cm3 g 4 4 Barite, g 449 449 Amine Treated Hrs. Hot-rolled 250° F. 0 16 0 16 Fann

Drilling method

psi (3.45 MPa) and wherein a filter cake is Barite (barium sulfate) 50 lb/bbl (143 kg/loss of 10 mls at a temperature of 250° F

Wellbore servicing compositions comprising a density

7048054 Cement compositions containing coarse barite 12. The method of claim 10 wherein the alternatively from about 250 psi to about 12000

Method of removing an invert emulsion filter cake after the

“Evaluation of a New Barite Dissolver: Lab 12. The microemulsion of claim 10 where the mud-off at 500 psi (3.4 MPa) and 150° F

Temporary fluid diversion agents for use in geothermal well

2010620- bentonite and barite can form a non-removable chemical modifiers within the water soluble cement.psi and equipped with a heating jack

Microemulsion or in-situ microemulsion for releasing stuck pipe

10 lb/gal (1.2 kg/liter) CaCl2 brine with barite dissolvers (chelants) or other precursorand 500 psi (3.4 MPa) was to have a filter

Composition comprising ionomer and polyamide

10% of a zinc-neutralized ionomer, about 15 to In this example, polypropylene and barite were (ASTM D648 at 66 and 264 psi of pressure),

Electrically conductive non-aqueous wellbore fluids

10 μS m−1 at 1 kHz, and wherein it clays and weighting material such as barite. 500 psi (ml) Conductivity Results (at 500 Hz

Non-aqueous gels for consolidating and stabilizing wellbore

wherein x is an integer selected from 0 to a hardness ranging from about 10 to 7,000 psiformulation comprising 10.5 ppg barite and 45%

Ultra-HTHP Scale Control for Deepwater Oil and Gas Production

(10,000 psi) environment, which may be associated with brine containing The results to-date indicated that (1) the solubility of barite at up

ASSEMBLY AND METHOD FOR SUBSEA WELL DRILLING AND

An assembly suitable for subsea drilling and with a pressure rating of at least 10,000 psi(one bentonite, three barite and two cement)

Fusing materials for prevention of lost circulation

barite, fly ash, calcium carbonate, hematite 250 cc - 60 sec 200 cc - 60 sec 180 cc - 200, 400, and 600 psi) for 5-10 minutes

Method for primary cementing a well with a drilling mud which

cement by contact with an initiator and, barite, iron ore, lead sulfide, ferrous oxide, 300 rpm 600 rpm (MR/hr) (MR) (psi.) __

Uptake of Radium during barite recrystallization

xSO4 solid solution via recrystallization, which barite present, the difference in the solubility the NAGRA – PSI thermodynamic database [10]